Ford Performance

The Bosch EV14 is the latest in gasoline-engine fuel injectors and are the optimal solution for fulfilling the requirements of the very wide range of intake-air and fuel systems on modern vehicles sold worldwide. This includes our latest Australian Ford and Holden models. At KPM we stock both original Bosch EV14 Injectors along with our range of KPM Motorsport Injectors enhanced from the EV14 design. By utilising a KPM high flow injector of the same original type as the vehicle manufacturer this allows you to maintain high integrity and performance characteristics from your cars computer and engine tune.

KPM offers full comprehensive on-site injector testing for all your tuning requirements and we provide this data with your set of injectors for no extra charge. This includes but not limited to SCT advantage, HP tuners and Motec. Also all our injectors are sold in carefully selected sets, each injector is matched  based on its flow characteristics to within +/- 1% tolerances. All development and testing is done by KPM using specialised equipment and then confirmed in dynamic real life situations by careful logging and data retrieval. By utilising injectors with similar flow characteristics this enables your car to be reliably tuned for maximum power, smooth idle and improved fuel economy. 
 
KPM Injectors are sold in various different sizes depending on your vehicle requirements, see injectors below for more details.
 
 

 

KPM1700cc

Compact
Standard
Long
$235.00 (inc GST)
$244.00 (inc GST)
TBA

     
  Nominal Flow Rate:  
                                          
                                 1740cc/min @ 400 kPa                
                                 1462cc/min @ 270 kPa                 
     
  Compatible Fuels:  
        Octane 95/98  
            Race Fuels        
        Alcohols (All ethanol blends including E85)         
                    
Length: 61mm Length: 49mm                                                         Length: 34mm
     
Vehicles:

Vehicles:

Vehicles: 

Holden VE 6.0/6.2 V8*                                              Ford FG 6 CYL 4.0L Turbo* Ford BA-BF 4.0L 6 CYL Normally Aspirated/Turbo
     Ford BA-FG V8 5.4L Boss
     Ford FG V8 5.0L Coyote*
     Holden VT-VZ LS1/LS2 V8
     
*Models that require an USCAR to Bosch electronic adaptor $10 per injector

 

           BUY NOW                                                                                 BUY NOW

 


 

KPM1500cc

                                          Long                                         
Standard
$159.00 (inc GST)
$145.00 (inc GST)

   
Nominal Flow Rate: Nominal Flow Rate:
                                 1580cc/min @ 475 kPa                                   1580cc/min @ 475 kPa
                                 1500cc/min @ 400 kPa                                   1500cc/min @ 400 kPa
                                 1250cc/min @ 270 kPa                                   1250cc/min @ 270 kPa
   
Length: 61mm Length: 49mm
Compatible Fuels: Compatible Fuels:
                                 Octane 95/98                                    Octane 95/98
                                 Race Fuels                                    Race Fuels
                                 Alcohols                                    Alcohols
                                 All ethanol blends including E85                                    All ethanol blends including E85
   

Vehicles:                                                                              

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo Ford FG 6 CYL 4.0L Turbo
Ford BA-FG V8 5.4L Boss  
Ford FG V8 5.0L Coyote*  
Holden VT-VZ LS1/LS2 V8  
   
*Models that require an USCAR to Bosch electronic adaptor $10 per injector

  

                BUY NOW                                                                                 BUY NOW

 

 

 


 

 

 

 

KPM1000cc

  Long
Standard
Compact
$99.00 (inc GST)
$99.00 (inc GST)
$99.00 (inc GST)

     
Nominal Flow Rate: Nominal Flow Rate: Nominal Flow Rate:
                1300cc/min @ 475 kPa                 1300cc/min @ 475 kPa                 1300cc/min @ 475 kPa
                1200cc/min @ 400 kPa                 1200cc/min @ 400 kPa                 1200cc/min @ 400 kPa
                1000cc/min @ 270 kPa                 1000cc/min @ 270 kPa                 1000cc/min @ 270 kPa
     
Length: 61mm Length: 49mm Length: 34mm
Compatible Fuels: Compatible Fuels: Compatible Fuels:
       Octane 95/98       Octane 95/98        Octane 95/98
       Race Fuels       Race Fuels        Race Fuels
       Alcohols       Alcohols        Alcohols
       All ethanol blends including E85       All ethanol blends including E85        All ethanol blends including E85
     
Vehicles:

Vehicles:

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo* Ford FG 6 CYL 4.0L Turbo* Holden VE-VF  6.0-6.2L V8
Ford BA-FG V8 5.4L Boss*    
Ford FG V8 5.0L Coyote    
Holden VT-VZ LS1/LS2 V8*    
     
*Models that require an Bosch to USCAR electronic adaptor $10 per injector

  

             BUY NOW                                                           BUY NOW                                         BUY NOW

 

 

 

 

 

 

KPM550cc

 

  Long
Standard
Compact
$99.00 (inc GST)
$99.00 (inc GST)
$99.00 (inc GST)

     
Nominal Flow Rate: Nominal Flow Rate: Nominal Flow Rate:
               700cc/min @ 475 kPa                700cc/min @ 475 kPa                700cc/min @ 475 kPa
               640cc/min @ 400 kPa                640cc/min @ 400 kPa                640cc/min @ 400 kPa
               550cc/min @ 270 kPa                550cc/min @ 270 kPa                550cc/min @ 270 kPa
     
Length: 61mm Length: 49mm Length: 34mm
Compatible Fuels: Compatible Fuels: Compatible Fuels:
      Octane 95/98       Octane 95/98        Octane 95/98
      Race Fuels       Race Fuels        Race Fuels
      Alcohols       Alcohols        Alcohols
      All ethanol blends including E85       All ethanol blends including E85        All ethanol blends including E85
     
Vehicles:  

Vehicles:

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo*  Ford FG 6 CYL 4.0L Turbo* Holden VE-VF 6.0-6.2L V8
Ford BA-FG V8 5.4L Boss*    
Ford FG V8 5.0L Coyote    
Holden VT-VZ LS1/LS2 V8*    
     
*Models that require an Bosch to USCAR electronic adaptor $10 per injector

 

             BUY NOW                                                             BUY NOW                                    BUY NOW

 

 

 


 

 

Streetfighter Twin & Single Air Power  by BMC

 

Application—FG 5lt Coyote

Product Description

BMC filters let you replace the original FPV factory filter perfectly and provide longer life, better performance and flow characteristics to handle all standard or up tuned/upgraded Coyote 5.0 S/C applications.

These filters are available in the following versions: Single Air (SA) with a simple lateral airflow;

                                                                            Twin Air (TW)with lateral and central airflow.

BMC Advanced Technology and Material Quality

The filtering material is composed of special cotton gauze soaked with ultra lowviscosity oil to give unmatched air permeability. The elastomeric used to produce the intake is especially heat-and-shock resistant .

It can't be distorted by temperature.  The special mesh used for the filtering element enables BMC to produce air filters for applications up to 700 Hp (Supercharging, NOS or Turbo) without having deforming problems in the filter. BMC’s relentless obsession for quality and performance enable them to produce racingair filters chosen by top motor sport teams world-wide including major F1 teams.

 

                                                                      Supply Only Twin  $159               Supply Only Single  $129  

  

                                                                 

                                                                    

                                                                        Buy Online

Streetfighter Oil Breathers

 

Over the last 2 years and after removing countless Coyote plenum covers we have noticed oil build up in the manifold and plenum areas.
This oil contaminates the incoming air bringing oil into the combustion chamber.
The results of this are oil usage and contaminated air/fuel mixtures.

If intercooled this oil builds up around the heat exchanger fins and tanks causing less cooling efficiency for the incoming air. On a supercharged engine this is especially important.

This need led KPM to engineer and manufacture oil and air separators.
The separators are easily fitted in line with the engine breathing system.
The oil is caught in the separator filters rather than contaminating intercooler and air fuel mixture with unwanted oil.
When the engine is not running the oil caught in the filters drains back down into the sump rather than the manifold.
This keeps the intake and intercooler clean and stops the oil burning through the engine.
Less oil usage and the plenum and intercooler is always clean.

Not only do they serve a purpose but they enhance the look of your engine bay with a racey OEM style finish.

We have manufactured our Streetfighter breathers out of billet aluminium and utilise high quality washable filters to ensure life time reliability. All Australian made.

The Streetfighter breathers are sold as a pair.

Supply Only: $395 per kit

 

                                                   

 

                                                    Buy Online

 

 

 

FUEL MODULE KITS

KPM Motorsport can now supply complete fuel system options for every BA-FG Sedan, Ute and engine options. With our full range of match flowed EV14 injectors coupled with our 460 lph or 600 lph in tank fuel modules, KPM have covered all your fuel system needs.

We offer a total solution by supplying our modules as a kit with all components a direct replacement fit, with plug in looms, and correct pressures for your application. If you wish we can go a step further and supply the correct fuel injector for your vehicle, power level and fuel module. We can even go a step further and supply you the SCT Flash Tuner with correct injector scaling so you can fit all your components yourself then drive your vehicle to have it tuned.

 

Walbro 460 Fuel Module Kit

Streetfighter 1000HP Fuel Module Kit

   
Supply Only $895
Supply and Fitted $1190
Supply Only $1695
Supply and Fitted $1990
   
Suits BA-FG Sedan / Ute   Suits BF MK2 - FG Sedan / Ute
   

Includes

Includes:

*460 Litre Per Hour Fuel Module  *600 Litre Per Hour Fuel module
*High Flow 4 Bar Fuel Pressure Regulator  *High Flow 4 Bar Fuel Pressure regulator
*Easy fit patch loom / wiring   *Easy fit patch loom / wiring  
     

 

BUY ON LINE - Streetfighter 1000 HP Fuel Module Kit

BUY ON LINE - Walbro 460 Fuel Module Kit

FUEL MODULE KITS

KPM Motorsport can now supply complete fuel system options for every BA-FG Sedan, Ute and engine options.
With our full range of match flowed EV14 injectors coupled with our 460 lph or 600 lph in tank fuel modules, KPM have covered all your fuel system needs.

We offer a total solution by supplying our modules as a kit with all components a direct replacement fit, with plug in looms, and correct pressures for your application.
If you wish we can go a step further and supply the correct fuel injector for your vehicle, power level and fuel module.
We can even go a step further and supply you the SCT Flash Tuner with correct injector scaling so you can fit all your components yourself then drive your vehicle to have it tuned.

To save confusion and allow hassle free selection we have attached a chart below to aid in the correct fuel module and injector choice for your application.

Walbro 460 Fuel Module Kit                                                                   Streetfighter 1000Hp Fuel Module Kit

Suits BA-FG Sedan / Ute                                                                                   Suits BF MK2 Dedan / FG Sedan

 

 

Streetfighter Track Stripes

  • Streetfighter Stripe Kit

Cost: $595

RedKPM500[1].jpg   KPMStreetFighterrearrims20x11-2[1].jpg


Streetfighter Snout & Pulley Upgrade (Supercharger)

Following on from our 70mm pulley upgrade, Streetfighter offer a complete Snout ,cover and pulley replacement for the factory 1900 Supercharger. Our high grade billet aluminium snout and cover allow you to select any size of supercharger pulley all the way down to 58mm. This means the ability to extract the maximum boost and power from your standard 1900 supercharger. Made from Aircraft grade aluminium and manufactured to high standards. The Streetfighter Front Cover, Snout & Pulley not only outperform the standard unit it also optimises the under bonnet look of your supercharger and engine.

 

Supply Only: $1590.00

Supply & Fitted: $2150.00

 Buy Online

 

 

 

Bosch EV14 and KPM Motorsport Fuel Injectors                                                            

The Bosch EV14 is the latest in gasoline-engine fuel injectors and are the optimal solution for fulfilling the requirements of the very wide range of intake-air and fuel systems on modern vehicles sold worldwide. This includes our latest Australian Ford and Holden models. At KPM we stock both original Bosch EV14 Injectors along with our range of KPM Motorsport Injectors enhanced from the EV14 design. By utilising a KPM high flow injector of the same original type as the vehicle manufacturer this allows you to maintain high integrity and performance characteristics from your cars computer and engine tune.

KPM offers full comprehensive on-site injector testing for all your tuning requirements and we provide this data with your set of injectors for no extra charge. This includes but not limited to SCT advantage, HP tuners and Motec. Also all our injectors are sold in carefully selected sets, each injector is matched  based on its flow characteristics to within +/- 1% tolerances. All development and testing is done by KPM using specialised equipment and then confirmed in dynamic real life situations by careful logging and data retrieval. By utilising injectors with similar flow characteristics this enables your car to be reliably tuned for maximum power, smooth idle and improved fuel economy. 
 
KPM Injectors are sold in various different sizes depending on your vehicle requirements, see injectors below for more details.
 
 

 

KPM1500cc

                                          Long                                         
Standard
$155.00 (inc GST)
$139.00 (inc GST)

   
Nominal Flow Rate: Nominal Flow Rate:
                                 1580cc/min @ 475 kPa                                   1580cc/min @ 475 kPa
                                 1500cc/min @ 400 kPa                                   1500cc/min @ 400 kPa
                                 1250cc/min @ 270 kPa                                   1250cc/min @ 270 kPa
   
Length: 61mm Length: 49mm
Compatible Fuels: Compatible Fuels:
                                 Octane 95/98                                    Octane 95/98
                                 Race Fuels                                    Race Fuels
                                 Alcohols                                    Alcohols
                                 All ethanol blends including E85                                    All ethanol blends including E85
   

Vehicles:                                                                              

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo Ford FG 6 CYL 4.0L Turbo
Ford BA-FG V8 5.4L Boss  
Ford FG V8 5.0L Coyote*  
Holden VT-VZ LS1/LS2 V8  
   
*Models that require an USCAR to Bosch electronic adaptor $10 per injector

 

 

 

 


 

 

KPM1000cc

  Long
Standard
Compact
$99.00 (inc GST)
$99.00 (inc GST)
$99.00 (inc GST)

     
Nominal Flow Rate: Nominal Flow Rate: Nominal Flow Rate:
                1300cc/min @ 475 kPa                 1300cc/min @ 475 kPa                 1300cc/min @ 475 kPa
                1200cc/min @ 400 kPa                 1200cc/min @ 400 kPa                 1200cc/min @ 400 kPa
                1000cc/min @ 270 kPa                 1000cc/min @ 270 kPa                 1000cc/min @ 270 kPa
     
Length: 61mm Length: 49mm Length: 34mm
Compatible Fuels: Compatible Fuels: Compatible Fuels:
       Octane 95/98       Octane 95/98        Octane 95/98
       Race Fuels       Race Fuels        Race Fuels
       Alcohols       Alcohols        Alcohols
       All ethanol blends including E85       All ethanol blends including E85        All ethanol blends including E85
     
Vehicles:

Vehicles:

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo* Ford FG 6 CYL 4.0L Turbo* Holden VE-VF  6.0-6.2L V8
Ford BA-FG V8 5.4L Boss*    
Ford FG V8 5.0L Coyote    
Holden VT-VZ LS1/LS2 V8*    
     
*Models that require an Bosch to USCAR electronic adaptor $10 per injector

 

 

 

 


 

 

KPM550cc

  Long
Standard
Compact
$99.00 (inc GST)
$99.00 (inc GST)
$99.00 (inc GST)

     
Nominal Flow Rate: Nominal Flow Rate: Nominal Flow Rate:
               700cc/min @ 475 kPa                700cc/min @ 475 kPa                700cc/min @ 475 kPa
               640cc/min @ 400 kPa                640cc/min @ 400 kPa                640cc/min @ 400 kPa
               550cc/min @ 270 kPa                550cc/min @ 270 kPa                550cc/min @ 270 kPa
     
Length: 61mm Length: 49mm Length: 34mm
Compatible Fuels: Compatible Fuels: Compatible Fuels:
      Octane 95/98       Octane 95/98        Octane 95/98
      Race Fuels       Race Fuels        Race Fuels
      Alcohols       Alcohols        Alcohols
      All ethanol blends including E85       All ethanol blends including E85        All ethanol blends including E85
     
Vehicles:  

Vehicles:

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo*  Ford FG 6 CYL 4.0L Turbo* Holden VE-VF 6.0-6.2L V8
Ford BA-FG V8 5.4L Boss*    
Ford FG V8 5.0L Coyote    
Holden VT-VZ LS1/LS2 V8*    
     
*Models that require an Bosch to USCAR electronic adaptor $10 per injector