Holden Performance

The Bosch EV14 is the latest in gasoline-engine fuel injectors and are the optimal solution for fulfilling the requirements of the very wide range of intake-air and fuel systems on modern vehicles sold worldwide. This includes our latest Australian Ford and Holden models. At KPM we stock both original Bosch EV14 Injectors along with our range of KPM Motorsport Injectors enhanced from the EV14 design. By utilising a KPM high flow injector of the same original type as the vehicle manufacturer this allows you to maintain high integrity and performance characteristics from your cars computer and engine tune.

KPM offers full comprehensive on-site injector testing for all your tuning requirements and we provide this data with your set of injectors for no extra charge. This includes but not limited to SCT advantage, HP tuners and Motec. Also all our injectors are sold in carefully selected sets, each injector is matched  based on its flow characteristics to within +/- 1% tolerances. All development and testing is done by KPM using specialised equipment and then confirmed in dynamic real life situations by careful logging and data retrieval. By utilising injectors with similar flow characteristics this enables your car to be reliably tuned for maximum power, smooth idle and improved fuel economy. 
 
KPM Injectors are sold in various different sizes depending on your vehicle requirements, see injectors below for more details.
 
 

 

KPM1700cc

Compact
Standard
Long
$235.00 (inc GST)
$244.00 (inc GST)
TBA

     
  Nominal Flow Rate:  
                                          
                                 1740cc/min @ 400 kPa                
                                 1462cc/min @ 270 kPa                 
     
  Compatible Fuels:  
        Octane 95/98  
            Race Fuels        
        Alcohols (All ethanol blends including E85)         
                    
Length: 61mm Length: 49mm                                                         Length: 34mm
     
Vehicles:

Vehicles:

Vehicles: 

Holden VE 6.0/6.2 V8*                                              Ford FG 6 CYL 4.0L Turbo* Ford BA-BF 4.0L 6 CYL Normally Aspirated/Turbo
     Ford BA-FG V8 5.4L Boss
     Ford FG V8 5.0L Coyote*
     Holden VT-VZ LS1/LS2 V8
     
*Models that require an USCAR to Bosch electronic adaptor $10 per injector

 

           BUY NOW                                                                                 BUY NOW

 


 

KPM1500cc

                                          Long                                         
Standard
$159.00 (inc GST)
$145.00 (inc GST)

   
Nominal Flow Rate: Nominal Flow Rate:
                                 1580cc/min @ 475 kPa                                   1580cc/min @ 475 kPa
                                 1500cc/min @ 400 kPa                                   1500cc/min @ 400 kPa
                                 1250cc/min @ 270 kPa                                   1250cc/min @ 270 kPa
   
Length: 61mm Length: 49mm
Compatible Fuels: Compatible Fuels:
                                 Octane 95/98                                    Octane 95/98
                                 Race Fuels                                    Race Fuels
                                 Alcohols                                    Alcohols
                                 All ethanol blends including E85                                    All ethanol blends including E85
   

Vehicles:                                                                              

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo Ford FG 6 CYL 4.0L Turbo
Ford BA-FG V8 5.4L Boss  
Ford FG V8 5.0L Coyote*  
Holden VT-VZ LS1/LS2 V8  
   
*Models that require an USCAR to Bosch electronic adaptor $10 per injector

  

                BUY NOW                                                                                 BUY NOW

 

 

 


 

 

 

 

KPM1000cc

  Long
Standard
Compact
$99.00 (inc GST)
$99.00 (inc GST)
$99.00 (inc GST)

     
Nominal Flow Rate: Nominal Flow Rate: Nominal Flow Rate:
                1300cc/min @ 475 kPa                 1300cc/min @ 475 kPa                 1300cc/min @ 475 kPa
                1200cc/min @ 400 kPa                 1200cc/min @ 400 kPa                 1200cc/min @ 400 kPa
                1000cc/min @ 270 kPa                 1000cc/min @ 270 kPa                 1000cc/min @ 270 kPa
     
Length: 61mm Length: 49mm Length: 34mm
Compatible Fuels: Compatible Fuels: Compatible Fuels:
       Octane 95/98       Octane 95/98        Octane 95/98
       Race Fuels       Race Fuels        Race Fuels
       Alcohols       Alcohols        Alcohols
       All ethanol blends including E85       All ethanol blends including E85        All ethanol blends including E85
     
Vehicles:

Vehicles:

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo* Ford FG 6 CYL 4.0L Turbo* Holden VE-VF  6.0-6.2L V8
Ford BA-FG V8 5.4L Boss*    
Ford FG V8 5.0L Coyote    
Holden VT-VZ LS1/LS2 V8*    
     
*Models that require an Bosch to USCAR electronic adaptor $10 per injector

  

             BUY NOW                                                           BUY NOW                                         BUY NOW

 

 

 

 

 

 

KPM550cc

 

  Long
Standard
Compact
$99.00 (inc GST)
$99.00 (inc GST)
$99.00 (inc GST)

     
Nominal Flow Rate: Nominal Flow Rate: Nominal Flow Rate:
               700cc/min @ 475 kPa                700cc/min @ 475 kPa                700cc/min @ 475 kPa
               640cc/min @ 400 kPa                640cc/min @ 400 kPa                640cc/min @ 400 kPa
               550cc/min @ 270 kPa                550cc/min @ 270 kPa                550cc/min @ 270 kPa
     
Length: 61mm Length: 49mm Length: 34mm
Compatible Fuels: Compatible Fuels: Compatible Fuels:
      Octane 95/98       Octane 95/98        Octane 95/98
      Race Fuels       Race Fuels        Race Fuels
      Alcohols       Alcohols        Alcohols
      All ethanol blends including E85       All ethanol blends including E85        All ethanol blends including E85
     
Vehicles:  

Vehicles:

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo*  Ford FG 6 CYL 4.0L Turbo* Holden VE-VF 6.0-6.2L V8
Ford BA-FG V8 5.4L Boss*    
Ford FG V8 5.0L Coyote    
Holden VT-VZ LS1/LS2 V8*    
     
*Models that require an Bosch to USCAR electronic adaptor $10 per injector

 

             BUY NOW                                                             BUY NOW                                    BUY NOW

 

 

 


 

 

KPM Performance Products

KPM VE Stealth OTR

KPM is proud to announce the release of our new KPM STEALTH OTR for the VE V8 commodore range. This intake is able to run the Air Flow Meter and therefore makes it completely street legal. It utilises a high quality air filter for maximum air flow witch gives it an improved induction sound & it’s proven & Dyno tested for maximum power gains. It has a complete factory look under the bonnet & is made from high quality factory plastic and extremely easy to install

There are a number of OTR’s available on the market .What makes ours better & unique. We have found that being able to offer a superior quality & better looking street legal OTR which has been Dyno tested for maximum power gains, makes it the best buy on the market.

KPM VE STEALTH OTR Supply Only: $605.00

Supply & fitted : $680

Optional

Infill Panell Supply only:$59.00

Facia Panel Supply only:$104

Purchase this product at our online store

 

 

 

 

 KPM Stealth OTR Side Panels.JPG   KPM OTR Side Panels.JPG   

 

    

Easy 6 Months Interest Free Finance Now Available !

  

KPM VE OTR Intake

   KPM Stealth OTR Test 1.JPG    

KPM Stealth OTR MAF 

 

 

 



Body Stiping Kits


KH14 BASE KIT: $395 (supply only)

 Buy Online 

          Supply & Fitted-- $460

KH15 TOP CAR KIT: $395 (supply only)

 Buy Online 

           Supply & Fitted-- $460          

                 

KH16 TOP AND BASE KIT: $695 (supply only)

 Buy Online

           Supply & Fitted--$799

KPM Ve Ute.JPG

 

 

Easy 6 Months Interest Free Finance Now Available !

VEDUAL KPM Twin intank VE Performance Fuel Pump



KPM Twin intank VE Performance Fuel pump assemblies are now available to deliver cool, dense fuel for up to 1000 Hp VE Commodores both Forced Induction and naturally aspirated.

This assembly utilises 2 high performance Walbro pumps and replaces the standard intank fuel assembly as a whole.

No messy surge tanks/external pumps and the associated noise and fuel smells. No need for expensive fuel tank replacements.

The assembly is a direct fit in place of the standard unit and incorporates all standard fittings and wiring to make for an easy fit. Just click standard fittings to the assembly and go.

You are also able to replace the standard fittings with dash fittings for highest application uses.

Also integrated in the complete assembly is a fuel pressure regulator which is easily adjustable once the assembly is fitted.

Cost: $1795

Purchase this product at our online store

VEFUELT KPM VE Commodore Total Solution Fuel System



KPM High Flow/Volume Fuel rails
Twin Intank High Flow Fuel Pump Assembly incorporating Fuel Pressure regulator.

Cost: $2295Purchase this product at our online store

 

 

Easy 6 Months Interest Free Finance Now Available !

 

KPM Online Shop
Log Book Servicing

Bring your vehicle to KPM Motorsport for complete manufacturer approved servicing. All makes and models.

Call 8299 9998