Ford Performance

The Bosch EV14 is the latest in gasoline-engine fuel injectors and are the optimal solution for fulfilling the requirements of the very wide range of intake-air and fuel systems on modern vehicles sold worldwide. This includes our latest Australian Ford and Holden models. At KPM we stock both original Bosch EV14 Injectors along with our range of KPM Motorsport Injectors enhanced from the EV14 design. By utilising a KPM high flow injector of the same original type as the vehicle manufacturer this allows you to maintain high integrity and performance characteristics from your cars computer and engine tune.

KPM offers full comprehensive on-site injector testing for all your tuning requirements and we provide this data with your set of injectors for no extra charge. This includes but not limited to SCT advantage, HP tuners and Motec. Also all our injectors are sold in carefully selected sets, each injector is matched  based on its flow characteristics to within +/- 1% tolerances. All development and testing is done by KPM using specialised equipment and then confirmed in dynamic real life situations by careful logging and data retrieval. By utilising injectors with similar flow characteristics this enables your car to be reliably tuned for maximum power, smooth idle and improved fuel economy. 
 
KPM Injectors are sold in various different sizes depending on your vehicle requirements, see injectors below for more details.
 
 

 

KPM1700cc

Compact
Standard
Long
$235.00 (inc GST)
$244.00 (inc GST)
TBA

     
  Nominal Flow Rate:  
                                          
                                 1740cc/min @ 400 kPa                
                                 1462cc/min @ 270 kPa                 
     
  Compatible Fuels:  
        Octane 95/98  
            Race Fuels        
        Alcohols (All ethanol blends including E85)         
                    
Length: 61mm Length: 49mm                                                         Length: 34mm
     
Vehicles:

Vehicles:

Vehicles: 

Holden VE 6.0/6.2 V8*                                              Ford FG 6 CYL 4.0L Turbo* Ford BA-BF 4.0L 6 CYL Normally Aspirated/Turbo
     Ford BA-FG V8 5.4L Boss
     Ford FG V8 5.0L Coyote*
     Holden VT-VZ LS1/LS2 V8
     
*Models that require an USCAR to Bosch electronic adaptor $10 per injector

 

           BUY NOW                                                                                 BUY NOW

 


 

KPM1500cc

                                          Long                                         
Standard
$159.00 (inc GST)
$145.00 (inc GST)

   
Nominal Flow Rate: Nominal Flow Rate:
                                 1580cc/min @ 475 kPa                                   1580cc/min @ 475 kPa
                                 1500cc/min @ 400 kPa                                   1500cc/min @ 400 kPa
                                 1250cc/min @ 270 kPa                                   1250cc/min @ 270 kPa
   
Length: 61mm Length: 49mm
Compatible Fuels: Compatible Fuels:
                                 Octane 95/98                                    Octane 95/98
                                 Race Fuels                                    Race Fuels
                                 Alcohols                                    Alcohols
                                 All ethanol blends including E85                                    All ethanol blends including E85
   

Vehicles:                                                                              

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo Ford FG 6 CYL 4.0L Turbo
Ford BA-FG V8 5.4L Boss  
Ford FG V8 5.0L Coyote*  
Holden VT-VZ LS1/LS2 V8  
   
*Models that require an USCAR to Bosch electronic adaptor $10 per injector

  

                BUY NOW                                                                                 BUY NOW

 

 

 


 

 

 

 

KPM1000cc

  Long
Standard
Compact
$99.00 (inc GST)
$99.00 (inc GST)
$99.00 (inc GST)

     
Nominal Flow Rate: Nominal Flow Rate: Nominal Flow Rate:
                1300cc/min @ 475 kPa                 1300cc/min @ 475 kPa                 1300cc/min @ 475 kPa
                1200cc/min @ 400 kPa                 1200cc/min @ 400 kPa                 1200cc/min @ 400 kPa
                1000cc/min @ 270 kPa                 1000cc/min @ 270 kPa                 1000cc/min @ 270 kPa
     
Length: 61mm Length: 49mm Length: 34mm
Compatible Fuels: Compatible Fuels: Compatible Fuels:
       Octane 95/98       Octane 95/98        Octane 95/98
       Race Fuels       Race Fuels        Race Fuels
       Alcohols       Alcohols        Alcohols
       All ethanol blends including E85       All ethanol blends including E85        All ethanol blends including E85
     
Vehicles:

Vehicles:

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo* Ford FG 6 CYL 4.0L Turbo* Holden VE-VF  6.0-6.2L V8
Ford BA-FG V8 5.4L Boss*    
Ford FG V8 5.0L Coyote    
Holden VT-VZ LS1/LS2 V8*    
     
*Models that require an Bosch to USCAR electronic adaptor $10 per injector

  

             BUY NOW                                                           BUY NOW                                         BUY NOW

 

 

 

 

 

 

KPM550cc

 

  Long
Standard
Compact
$99.00 (inc GST)
$99.00 (inc GST)
$99.00 (inc GST)

     
Nominal Flow Rate: Nominal Flow Rate: Nominal Flow Rate:
               700cc/min @ 475 kPa                700cc/min @ 475 kPa                700cc/min @ 475 kPa
               640cc/min @ 400 kPa                640cc/min @ 400 kPa                640cc/min @ 400 kPa
               550cc/min @ 270 kPa                550cc/min @ 270 kPa                550cc/min @ 270 kPa
     
Length: 61mm Length: 49mm Length: 34mm
Compatible Fuels: Compatible Fuels: Compatible Fuels:
      Octane 95/98       Octane 95/98        Octane 95/98
      Race Fuels       Race Fuels        Race Fuels
      Alcohols       Alcohols        Alcohols
      All ethanol blends including E85       All ethanol blends including E85        All ethanol blends including E85
     
Vehicles:  

Vehicles:

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo*  Ford FG 6 CYL 4.0L Turbo* Holden VE-VF 6.0-6.2L V8
Ford BA-FG V8 5.4L Boss*    
Ford FG V8 5.0L Coyote    
Holden VT-VZ LS1/LS2 V8*    
     
*Models that require an Bosch to USCAR electronic adaptor $10 per injector

 

             BUY NOW                                                             BUY NOW                                    BUY NOW

 

 

 


 

 

Streetfighter FG Air Intake

KPM has released the new Air Intake for the FG 4.0 naturally aspirated,
4.0 Turbo and 5.4 V8 range.(FGXR6Turbo,FGF6, FGXR8, FGBOSS)

It utilises a high quality air filter for maximum air flow witch gives it
an improved induction sound and it's proven and Dyno tested for maximum
power gains. It has a complete factory look under the bonnet and is made
from highest quality factory plastic and extremely easy to install.

Cool air is essential for optimum performance, as it contains more oxygen and is denser
than warm air, resulting in a more effective burning
of the fuel mix.

We believe the Streetfighter Air Intake is the best value on the market, not just in
its highquality look & make, but in also giving your car the maximum power gains.

Streetfighter FG AIR INTAKE Supply only with full cover $595.00

OPTIONAL

Sports Cover $69

  FGXR6Turbo and FGF6 Air Intake 

BUY ONLINE

FUEL MODULE KITS

KPM Motorsport can now supply complete fuel system options for every BA-FG Sedan, Ute and engine options. With our full range of match flowed EV14 injectors coupled with our 460 lph or 600 lph in tank fuel modules, KPM have covered all your fuel system needs.

We offer a total solution by supplying our modules as a kit with all components a direct replacement fit, with plug in looms, and correct pressures for your application. If you wish we can go a step further and supply the correct fuel injector for your vehicle, power level and fuel module. We can even go a step further and supply you the SCT Flash Tuner with correct injector scaling so you can fit all your components yourself then drive your vehicle to have it tuned.

 

Walbro 460 Fuel Module Kit

Streetfighter 1000HP Fuel Module Kit

   
Supply Only $895
Supply and Fitted $1190
Supply Only $1695
Supply and Fitted $1990
   
Suits BA-FG Sedan / Ute   Suits BF MK2 - FG Sedan / Ute
   

Includes

Includes:

*460 Litre Per Hour Fuel Module  *600 Litre Per Hour Fuel module
*High Flow 4 Bar Fuel Pressure Regulator  *High Flow 4 Bar Fuel Pressure regulator
*Easy fit patch loom / wiring   *Easy fit patch loom / wiring  
     

 

BUY ON LINE - Streetfighter 1000 HP Fuel Module Kit

BUY ON LINE - Walbro 460 Fuel Module Kit

KPM Turbo Performance Products

KPM are now providing a range of performance products to suit the FG 4 litre Turbo Ford models. More information on these exciting upgrades will be provided soon.

Please call KPM on 08 8299 9998 or enquire online.

KF29 F6 Air Intake

Allowing more air into your engine with this F6 Intake Tube gives potential for more power from your upgrades. Especially suited to throttle body, cold air induction, exhaust and tuning upgrades.

Cost: $220 Fitted and dyno tested

KF19 KPM Ripshifter Stockists

KPM are now stockists of the Ripshift 5 and 6 speed gear stick assemblies for BF/BA model Fords and earlier. If you haven’t felt the difference with these gear sticks, come in and we would be happy provide you with a demonstration. You’ll never miss third gear again with straight gate selection.

          Ripshift Gear Stick Assembly:              $519

KF19 Ripshift Gear Stick Assembly Fitted:   $799

 

KF29 Typhoon Air Intake

Allowing more air into your engine with this Typhoon Intake Tube gives potential for more power from your upgrades. Especially suited to throttle body, cold air induction, exhaust and tuning upgrades.

Cost: $220 Fitted and dyno tested

Streetfighter Track Stripes

  • Streetfighter Stripe Kit

Cost: $595

RedKPM500[1].jpg   KPMStreetFighterrearrims20x11-2[1].jpg


KPM Online Shop
Log Book Servicing

Bring your vehicle to KPM Motorsport for complete manufacturer approved servicing. All makes and models.

Call 8299 9998