Ford Performance

The Bosch EV14 is the latest in gasoline-engine fuel injectors and are the optimal solution for fulfilling the requirements of the very wide range of intake-air and fuel systems on modern vehicles sold worldwide. This includes our latest Australian Ford and Holden models. At KPM we stock both original Bosch EV14 Injectors along with our range of KPM Motorsport Injectors enhanced from the EV14 design. By utilising a KPM high flow injector of the same original type as the vehicle manufacturer this allows you to maintain high integrity and performance characteristics from your cars computer and engine tune.

KPM offers full comprehensive on-site injector testing for all your tuning requirements and we provide this data with your set of injectors for no extra charge. This includes but not limited to SCT advantage, HP tuners and Motec. Also all our injectors are sold in carefully selected sets, each injector is matched  based on its flow characteristics to within +/- 1% tolerances. All development and testing is done by KPM using specialised equipment and then confirmed in dynamic real life situations by careful logging and data retrieval. By utilising injectors with similar flow characteristics this enables your car to be reliably tuned for maximum power, smooth idle and improved fuel economy. 
 
KPM Injectors are sold in various different sizes depending on your vehicle requirements, see injectors below for more details.
 
 

 

KPM1700cc

Compact
Standard
Long
$235.00 (inc GST)
$244.00 (inc GST)
TBA

     
  Nominal Flow Rate:  
                                          
                                 1740cc/min @ 400 kPa                
                                 1462cc/min @ 270 kPa                 
     
  Compatible Fuels:  
        Octane 95/98  
            Race Fuels        
        Alcohols (All ethanol blends including E85)         
                    
Length: 61mm Length: 49mm                                                         Length: 34mm
     
Vehicles:

Vehicles:

Vehicles: 

Holden VE 6.0/6.2 V8*                                              Ford FG 6 CYL 4.0L Turbo* Ford BA-BF 4.0L 6 CYL Normally Aspirated/Turbo
     Ford BA-FG V8 5.4L Boss
     Ford FG V8 5.0L Coyote*
     Holden VT-VZ LS1/LS2 V8
     
*Models that require an USCAR to Bosch electronic adaptor $10 per injector

 

           BUY NOW                                                                                 BUY NOW

 


 

KPM1500cc

                                          Long                                         
Standard
$159.00 (inc GST)
$145.00 (inc GST)

   
Nominal Flow Rate: Nominal Flow Rate:
                                 1580cc/min @ 475 kPa                                   1580cc/min @ 475 kPa
                                 1500cc/min @ 400 kPa                                   1500cc/min @ 400 kPa
                                 1250cc/min @ 270 kPa                                   1250cc/min @ 270 kPa
   
Length: 61mm Length: 49mm
Compatible Fuels: Compatible Fuels:
                                 Octane 95/98                                    Octane 95/98
                                 Race Fuels                                    Race Fuels
                                 Alcohols                                    Alcohols
                                 All ethanol blends including E85                                    All ethanol blends including E85
   

Vehicles:                                                                              

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo Ford FG 6 CYL 4.0L Turbo
Ford BA-FG V8 5.4L Boss  
Ford FG V8 5.0L Coyote*  
Holden VT-VZ LS1/LS2 V8  
   
*Models that require an USCAR to Bosch electronic adaptor $10 per injector

  

                BUY NOW                                                                                 BUY NOW

 

 

 


 

 

 

 

KPM1000cc

  Long
Standard
Compact
$99.00 (inc GST)
$99.00 (inc GST)
$99.00 (inc GST)

     
Nominal Flow Rate: Nominal Flow Rate: Nominal Flow Rate:
                1300cc/min @ 475 kPa                 1300cc/min @ 475 kPa                 1300cc/min @ 475 kPa
                1200cc/min @ 400 kPa                 1200cc/min @ 400 kPa                 1200cc/min @ 400 kPa
                1000cc/min @ 270 kPa                 1000cc/min @ 270 kPa                 1000cc/min @ 270 kPa
     
Length: 61mm Length: 49mm Length: 34mm
Compatible Fuels: Compatible Fuels: Compatible Fuels:
       Octane 95/98       Octane 95/98        Octane 95/98
       Race Fuels       Race Fuels        Race Fuels
       Alcohols       Alcohols        Alcohols
       All ethanol blends including E85       All ethanol blends including E85        All ethanol blends including E85
     
Vehicles:

Vehicles:

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo* Ford FG 6 CYL 4.0L Turbo* Holden VE-VF  6.0-6.2L V8
Ford BA-FG V8 5.4L Boss*    
Ford FG V8 5.0L Coyote    
Holden VT-VZ LS1/LS2 V8*    
     
*Models that require an Bosch to USCAR electronic adaptor $10 per injector

  

             BUY NOW                                                           BUY NOW                                         BUY NOW

 

 

 

 

 

 

KPM550cc

 

  Long
Standard
Compact
$99.00 (inc GST)
$99.00 (inc GST)
$99.00 (inc GST)

     
Nominal Flow Rate: Nominal Flow Rate: Nominal Flow Rate:
               700cc/min @ 475 kPa                700cc/min @ 475 kPa                700cc/min @ 475 kPa
               640cc/min @ 400 kPa                640cc/min @ 400 kPa                640cc/min @ 400 kPa
               550cc/min @ 270 kPa                550cc/min @ 270 kPa                550cc/min @ 270 kPa
     
Length: 61mm Length: 49mm Length: 34mm
Compatible Fuels: Compatible Fuels: Compatible Fuels:
      Octane 95/98       Octane 95/98        Octane 95/98
      Race Fuels       Race Fuels        Race Fuels
      Alcohols       Alcohols        Alcohols
      All ethanol blends including E85       All ethanol blends including E85        All ethanol blends including E85
     
Vehicles:  

Vehicles:

Vehicles: 

Ford BA-BF 4.0L 6 CYL Normally aspirated, Turbo*  Ford FG 6 CYL 4.0L Turbo* Holden VE-VF 6.0-6.2L V8
Ford BA-FG V8 5.4L Boss*    
Ford FG V8 5.0L Coyote    
Holden VT-VZ LS1/LS2 V8*    
     
*Models that require an Bosch to USCAR electronic adaptor $10 per injector

 

             BUY NOW                                                             BUY NOW                                    BUY NOW

 

 

 


 

 

FUEL MODULE KITS

KPM Motorsport can now supply complete fuel system options for every BA-FG Sedan, Ute and engine options. With our full range of match flowed EV14 injectors coupled with our 460 lph or 600 lph in tank fuel modules, KPM have covered all your fuel system needs.

We offer a total solution by supplying our modules as a kit with all components a direct replacement fit, with plug in looms, and correct pressures for your application. If you wish we can go a step further and supply the correct fuel injector for your vehicle, power level and fuel module. We can even go a step further and supply you the SCT Flash Tuner with correct injector scaling so you can fit all your components yourself then drive your vehicle to have it tuned.

 

Walbro 460 Fuel Module Kit

Streetfighter 1000HP Fuel Module Kit

   
Supply Only $895
Supply and Fitted $1190
Supply Only $1695
Supply and Fitted $1990
   
Suits BA-FG Sedan / Ute   Suits BF MK2 - FG Sedan / Ute
   

Includes

Includes:

*460 Litre Per Hour Fuel Module  *600 Litre Per Hour Fuel module
*High Flow 4 Bar Fuel Pressure Regulator  *High Flow 4 Bar Fuel Pressure regulator
*Easy fit patch loom / wiring   *Easy fit patch loom / wiring  
     

 

BUY ON LINE - Streetfighter 1000 HP Fuel Module Kit

BUY ON LINE - Walbro 460 Fuel Module Kit

KPM TURBO PERFORMANCE PRODUCTS


KF28 KPM Premium Intercoolers

KPM fabricate only the best intercoolers using premium materials from Australian only suppliers. With the intercooler doing one of the most important jobs on the turbo system, quality is essential. Proper intercooler upgrades must be exactly that, an upgrade! As its name suggests, the intercooler is responsible for cooling the incoming hot air created by the turbo. With an efficient intercooler, the engine can reliably deliver more power. A poor intercooler on an upgraded engine can lead to detonation and subsequent engine failure. All KPM Intercoolers are fully tested and developed specifically for their required application.

Fitted and dyno tested: $1695


PWR Air to Air Intercooler

Because KPM Motorsport are PWR Dealers we can also supply you with any of their Premium of the shelf units.

PWR Performance Products are making full use of the laws of physics, developing several of the most efficient intercoolers in the world. PWR use a revolutionary seamless rounded leading edge tube design throughout the manufacturing process. These tubes have an integrated internal fin with a straight through design, which improves heat transfer for less pressure drop, resulting in higher flow and reduced lag time. PWR intercoolers are individually hand manufactured using 12 FPI (fins per square inch) and can be custom designed by in house “Auto CAD” design division or simply just replace your current OEM system for better flow and performance.


 

Plazmaman 1200HP Intercooler

Plazmaman 1200HP intercoolerAs used in our KPM Cyclone kits,

This is the one to use if you want really BIG power, this intercooler is rated at 1200HP when used with the rest of the 12K intake kit.

Developed by Plazmaman utilising over 10 years experience  in all forms of motorsports . These intercoolers utilise a unique 505 x 395 x 76 mm tube and fin core and are a  feather- weight 7.5 kgs. Using a genuine 76mm core, with a 75mm internal dimension, compare that with a bar and plate type intercooler of the same external dimension that loses on average 10-14mm internally, these cores have minimum mass and maximum surface area. Add to that end tanks that have been designed using computer modelling to maximise thermal distribution and minimise turbulence and you have the most efficient intercooler on the market today for the XR6T or F6. 

Fitted and dyno tested: $2100

 

KF29 F6 Air Intake

Allowing more air into your engine with this F6 Intake Tube gives potential for more power from your upgrades. Especially suited to throttle body, cold air induction, exhaust and tuning upgrades.

Fitted and dyno tested: $220

K&N Performance Air Filter

This is an easy and affordable upgrade on your air filtering system. The K&N Air Filters are a lifetime filter that removes contaminants better than standard filters into your engine.  This means that you won’t ever have to purchase another filter again, as these performance filters are fully serviceable.

Cost: $149


KF31 Cobra Valve Springs

Following months of design, development and engine dyno testing, Cobra has created a special heavy-duty valve spring to suit the BA XR6 Turbo engine.  Cobra valve springs cope with high lift camshafts, but without radically heavy spring rates often associated with high performance engines.

As a consequence, whether you are using a stock or modified camshaft, the Cobra valve spring will not reduce the life span of the valve train (camshaft, valve etc).

The Cobra valve spring is designed to work in almost every application with engines ranging from mildly modified to radical 800kw applications. They are also recommended for all 'boosted' engines whereby the factory intercooler results in significant backpressure on the back of the valve (a problem not associated with Cobra's Stage 2 kit due to the incredibly free intake design).

Cobra's high performance valve spring does not require any cylinder head machining or any other modification to fit.  They are recommended for all XR6 Turbo engines (irrespective of the engine management system or other ancillaries) and best of all, a full 24 spring kit is available from KPM Motorsport for just $445 not fitted) inclusive of GST.

Cobra Springs Fitted: $1180

For more information, please call KPM Motorsport on (08) 8299 9998


KPM Plazmaman 12K Kit

Full 1200 HP  Kit  $4995.00 inc GST Supply Only

As used in our 500KW Cyclone

After significant testing, KPM Motorsport is proud to use and promote Plazmamans 12K Plenum and Intercooler kit (www.plazmaman.com.au)
Utilising our extensive research and experience, it has been found that the BA engine suffers from an inability to efficiently inhale, but rather than simply creating ‘oversized’ factory style parts, we chose to vastly improve the engine’s breathing ability above standard levels via an emphasis on removing the many inherent inlet obstructions. Plazmaman's own R&D Departmenth has spent significant time computer simulating and manufacturing various induction designs whereby virtually the entire factory induction system is replaced with a completely new set-up.
Once installed, the KPM Cyclone kit will increase your car’s performance by providing better throttle response and significant kw increases without sacrificing everyday drivability.

The kit itself is beautifully made and polished to a mirror finish, and looks very impressive when installed.

A larger more efficient intercooler capable of flowing for over 1200BHP is utilised, as are mandrel bent pipes, and a cold air box.

We chose the Plazmaman kits for the following reasons:

  • Plazmaman were the first company in Australia to produce mandrel bent alloy piping for turbo applications.



  • All Plazmaman intercoolers use cores that have been painstakingly researched, developed and built in the USA and Europe.



  • The Plazmaman Charge-air cooler is one of the most thermally efficient and lightweight units in the world.



  • All Plazmaman kits are CNC machined and mandrel bent to exact tolerances, ensuring a perfect fit every time.



  • The quality of finish for these kits is second to none, not only are they incredibly well engineered, they look great too.



We are currently conducting dyno and track testing of these kits, and are extremely pleased with initial results, full details will be available on our website soon.

K&N Performance Air Filter

This is an easy and affordable upgrade on your air filtering system. The K&N Air Filters are a lifetime filter that removes contaminants better than standard filters into your engine.  This means that you won’t ever have to purchase another filter again, as these performance filters are fully serviceable.

Performance Air Filter: $149


KF30 KPM Engine Piping Kits

KPM are now stockists and dealers for Plazmaman Racing Components.

With the aftermarket performance upgrades generating greater power, Ford standard inlet hoses were unable to meet these increases in pressure.  Therefore, we introduced the Plazmaman kits on our top end performance upgrades.  KPM also searched for cheaper alternatives for lower range upgrades and found Plazmaman products to be of comparable quality and finish.  We have currently been using them on various vehicles with great results. 

Power increases using the Plazmaman Racing Components have been easily achieved by fitting a basic engine piping kit.  We have consistently been able to tune an extra 20 kilowatts by just replacing the engine piping alone.

Our Engine Piping basic kit sells for $1200 supplied, including fitting, tune check and minor reset on dyno.

Ask us for a quote to have a custom tune installed to compliment your engine piping upgrade kit. 

Other products include intercoolers and full engine piping kits.




KF19 KPM Ripshifter Stockists

KPM are now stockists of the Ripshift 5 and 6 speed gear stick assemblies for BF/BA model Fords and earlier. If you haven’t felt the difference with these gear sticks, come in and we would be happy provide you with a demonstration. You’ll never miss third gear again with straight gate selection.

         Ripshift Gear Stick Assembly:              $519

KF19 Ripshift Gear Stick Assembly Fitted:  $795

 

Auto Transmission Upgrade/Hi Stall Converter

As you increase engine power, demands on the vehicles drive line increase dramatically. Your vehicle transmission must be able to cope with the extra power and torque delivered from your engine upgrade.

KPM can engineer your transmission to cope with whatever the level of demands and applications you want from your vehicle. We remove your transmission and completely dismantle and inspect all internal components.  Our technicians then fully rebuild your transmission with upgraded performance components including Clutches, Shafts and Valve Body Shift Kits. Your transmission is then refitted to your vehicle and all necessary adjustments are performed.  At KPM, we offer various levels of performance builds to cope with full race applications or just reliable street performance.

Upgrades starting from $3600

Easy 6 Months Interest Free Finance Now Available !

Diff Ratio Upgrade

Apart from increasing your engine power, changing your diff ratio will improve your 0 to 100 km times more than any other upgrade.

Changing the diff gears is like changing gears on a push bike.  The lower the gear, the easier it is to accelerate from a standing start.  KPM can recommend a gear ratio for your diff that will provide the best performance for your requirements.  KPM can get you down the quarter mile as fast as possible or provide a balanced compromise to put some extra life into your sluggish vehicle set-up.  Whatever the application, a diff ratio upgrade will definitely transform your vehicle to provide a much more responsive and enjoyable drive.

Prices start from $1880 depending on model and application.

Auto Transmission Upgrade/Hi Stall Converter

As you increase engine power, demands on the vehicles drive line increase dramatically. Your vehicle transmission must be able to cope with the extra power and torque delivered from your engine upgrade.

KPM can engineer your transmission to cope with whatever the level of demands and applications you want from your vehicle. We remove your transmission and completely dismantle and inspect all internal components.  Our technicians then fully rebuild your transmission with upgraded performance components including Clutches, Shafts and Valve Body Shift Kits. Your transmission is then refitted to your vehicle and all necessary adjustments are performed.  At KPM, we offer various levels of performance builds to cope with full race applications or just reliable street performance.

Upgrades starting from $3600

Diff Ratio Upgrade

Apart from increasing your engine power, changing your diff ratio will improve your 0 to 100 km times more than any other upgrade.

Changing the diff gears is like changing gears on a push bike.  The lower the gear, the easier it is to accelerate from a standing start.  KPM can recommend a gear ratio for your diff that will provide the best performance for your requirements.  KPM can get you down the quarter mile as fast as possible or provide a balanced compromise to put some extra life into your sluggish vehicle set-up.  Whatever the application, a diff ratio upgrade will definitely transform your vehicle to provide a much more responsive and enjoyable drive.

Prices start from $1880 depending on model and application.

KH45 KAZZ LSD Upgrade

An increase in engine power places extra demands on your vehicle’s differential. Ford’s standard differentials are well known for slippage and failure from the Limited Slip Assembly when engine performance upgrades are installed. As a result, KPM recommends a performance rebuild of your differential using a KAZZ Heavy Duty Limited Slip Assembly (LSD). KAZZ LSD upgrades are suited to both street and race applications. We would also recommend that a Differential Ratio Upgrade be performed at the same time to give you the full benefit of your differential modifications.

Cost: $3990 supplied and fitted


KPM Online Shop
Log Book Servicing

Bring your vehicle to KPM Motorsport for complete manufacturer approved servicing. All makes and models.

Call 8299 9998